Roff T02 NSA Grey Non-Skid Adhesive | High-Bond Tile-on-Tile & Wet Area Bedding (30 Kg Bag)

Secure a permanent, slip-free layout for your walls and floors with the Roff T02 NSA Grey Non-Skid Adhesive. Formulated by Pidilite as a premium, ready-to-mix polymer-modified cementitious compound, this heavy-duty mixture is engineered for high-moisture environments and critical renovation projects.

This 30 Kg commercial pack features advanced non-skid properties, delivering a powerful initial grab that holds tiles firmly in place without slippage. It is the perfect professional choice for interior wall installations, wet room areas, and effortless tile-on-tile re-laying applications without the mess of hacking away old floors.

Key Features & Benefits

• Advanced Non-Skid Vertical Grab: Engineered with active anti-slump polymers that instantly cinch vertical surfaces, holding heavy ceramic or natural stone tiles in place on walls without sagging.

• Perfect for Tile-on-Tile Renovations: Specially modified to form a powerful bond directly over existing old tiles, stone, or smooth terrazzo floors, eliminating the noisy dust, labor costs, and debris of floor hacking.

• Water & Moisture Proof Matrix: Formulated to resist continuous moisture exposure, making it the ideal setting choice for bathroom walls, shower stalls, kitchen splashbacks, and laundry areas.

• High Polymer Flex Strength: Cures into a semi-flexible bedding layer that absorbs minor building vibrations and thermal expansion movements, preventing hollow sounds or sudden tile cracking.

• Extended Open Time Utility: Gives masonry teams a relaxed working window to adjust, slide, and align spacer joints perfectly before the adhesive layer starts its initial chemical set.

• Zero-Shrinkage Curing: Unlike traditional raw cement which shrinks and warps during drying, this compound cures uniformly to ensure full, even contact across the entire tile backing.

Technical Specifications

• Brand: Roff (A Pidilite Industries Quality Brand)

• Product Model Series: T02 NSA (Non-Skid Adhesive)

• Color Tone Formulation: Grey Powder Compound

• Product Weight Packaging: 30 Kg Moisture-Resistant Commercial Bag

• Material Base: High-Performance Polymer-Modified Cement Matrix

• Estimated Area Coverage: Approximately 75 to 80 square feet per 30 Kg bag at a standard bed thickness of 3 mm to 6 mm (varies depending on subfloor or old tile levelness).

• Application Environment: Bathroom Walls & Floors, Showers, Commercial Kitchens, Wash Balconies, Countertops, and Tile-on-Tile Overlays.

• Suitable Surfaces: Existing Vitrified/Ceramic Tiles, Sand-Cement Plasters, Smooth Cured Concrete, and Terrazzo Flooring.

Mixing & Application Guidelines

• Water Ratio Mix: Gradually add roughly 1 part water to 3 parts powder by volume into a clean mixing container. Blend thoroughly with a slow-speed mechanical stirrer until a smooth, uniform, lump-free paste forms.

• Resting Phase: Allow the wet mix to rest and slake for 5 minutes, then mix briefly for 60 seconds before applying with a professional notched trowel.

• Surface Check: Ensure the surface is clean, dry, and structurally sound. For old tile surfaces, wipe down completely to remove any grease, soap scum, or oily residues before laying the adhesive bed.